RKI Instruments
Industrial-grade gas detection built for environments that can’t afford failure.
Beacon 3200
The Beacon 3200 Controller is an advanced fixed-system controller capable of managing up to 32 gas-detection sensor points from a single unit. Housed in a NEMA 4X-rated enclosure for weather-tight operation, the Beacon 3200 is engineered for demanding industrial environments. Its 7-inch touchpad interface delivers a smooth operator experience without compromising on durability.
Features
Accepts LEL / O2 / CO2 / toxic direct connect sensors
Accepts any 4-20 mA transmitter, 2 or 3-wire
4-20 mA, RS-485, and Modbus TCP/IP outputs standard
115 / 220 VAC or 24 VDC operation
RFI / EMI resistant
FEATURES &
BENEFITS
Indoor Parkades
Use a carbon monoxide monitor, and or with, nitrogen dioxide sensors for automobile parkades with gasoline and diesel vehicles to control exhaust ventilation.
Refrigerant Gas Leak Monitoring
Install monitors in compressor rooms in close proximity to compressors and 1 – 3 (0.5 meters) close to the floor. Use series 60XX monitors and add a Opera 6000 control unit outside of the mechanical room at eye level to signal a potential risk to occupant entering the room.
Gas monitoring – Combustible Gases
Intelligent sensors store calibration data, so they can be swapped in the field.
Indoor Air Quality
Monitors are specifically designed for fresh air control in conference rooms, meeting rooms, restaurants, and public spaces. Fresh air dampers and economizers can be automated to condition the air and save energy during unoccupied times. See models 6015-5000 for applications where compressed carbon dioxide is stored or greenhouses where higher gas levels are expected.
Applications:
System Integrator
Contractors & Distributors
Building Owners
Facility Managers
One Stop Shop for Your Needs
Get Calibrated
Make sure your devices are properly calibrated.
Book a Service
Ensure your device is in good working order.
Rent Today!
Need a device on short or long term?.